BC370Q industrial ATX motherboard is equipped with LGA 1151 CPU socket with Intel® Q370 express chipset supporting the 8th and 9th generation Intel® Core™ (2C/4C/6C/8C), Celeron® and Pentium® processors. When paired with an Intel® Q370 chipset, these processors offer even greater CPU and graphics performance as compared to previous generations and introduce native USB 3.1 Gen2 (10Gb/s) support.
BC370Q is ideally suited for applications like gaming, content creation, virtual reality, transactional retail terminals, digital security systems, and healthcare.
System
CPU
LGA1151 Socket supports 8th/9th Gen Intel® Core™/Pentium/Celeron Processors up to 95W TDP
4 x DIMM sockets support 2666/2400/2133 MHz UDIMM up to 64GB system memory
BIOS
AMI 256Mb SPI BIOS
Expansion
1 x PCIe x 16 Slot
2 x PCIe x 4 Slots
2 x PCIe x 1 Slots
2 x PCI Slots
1 x M.2 Type M 2242, 2260, 2280 Slot (with PCIe x4 & SATA III)
1 x M.2 Type A/E 2232 (with USB & PCIe x1)
LAN Controller
LAN 1: Intel® i211-AT Gigabit Ethernet Controller
LAN 2: Intel® i219-LM Gigabit Ethernet Controller
Audio
Realtek ALC888S
Watchdog Timer
Reset: 1 sec. ~ 255min. and 1sec. or 1min./step
H/W Status Monitor
Monitoring System Temperature, Voltage, with Auto Throttling Control
TPM
Infineon® SLB 9665 TPM 2.0 Controller
Display
Graphics Engine
Intel® Integrated Graphic
Display Interfaces
2 x DisplayPort (supports DP++), 1 x HDMI, 1 x VGA
Display Capability
Supports 3 Independent Onboard Display
External I/O
Audio
1 x 3 Jacks Audio Connector (Line-in, Line-out, Mic-in)
USB
2 x USB 3.1 Gen 2 Type A Connectors
1 x USB 3.1 Gen 2 Type C Connectors
Note:
USB 3.1 Gen 1 (Speed up to 5Gbps), same as USB 3.0
USB 3.1 Gen 2 (Speed up to 10Gbps)
LAN and USB
2 x RJ45 + Dual USB 3.1 Gen 1 (Stacked) (4 x USB 3.1 Ports)
Display
1 x DB-15 VGA 2 x DisplayPort (supports DP++) 1 x HDMI
Internal I/O
USB
4 x USB 2.0 Headers (8 Ports on Header)
1 x USB 3.1 Gen 2 Header with Shroud (2 Ports on Header)
COM
5 x RS-232 Headers with Voltage Selection 1 x RS-232/422/485 Headers with Voltage Selection.
* Mating connector to COM port headers: JST PHDR-10VS or equivalent
SATA
5 x SATA III 1 x SATA III (Shared with M.2)
MIO
1 x LPT, 1 x LPC, 1 x SPI, 1 x Front Audio, 1 x Amplifier, 1 x Front Panel, 1 x 8-bit GPIO, 1 x 4-pin CPU Fan, 2 x 4-pin Chassis Fan, 2 x LAN Status LDE Headers, 1 x Horizontal Socket Type CMOS Battery Holder, 1 x Chassis Intrusion Locking Type Header
Mechanical and Environment
Power Type
1 x Std. 24 pin ATX Connector 1 x 4 pin ATX 12 Connector AT/ATX Mode Jumper
Operating Temperature
0 ～ 60°C （32 ～ 140°F）
Storage Temperature
-20 ～ 80°C （-4 ～ 176°F）
Operating Humidity
5 ～ 90％ Relative Humidity, Non-condensing
Storage Humidity
5 ～ 90％ Relative Humidity, Non-condensing
Form Factor
ATX
Dimensions (L) x (W)
12" (L) x 9.6" (W)
Weight
1.85 lbs
* All product specifications and product images are subject to change without notice. Last update: 2020/12/14
BCM is pleased to announce its full range of Coffee Lake industrial motherboards now support the latest 9th Gen Intel® Core™ H and S processors, codename Coffee Lake Refresh, serving as a successor to 8th Gen Coffee Lake series. Now BCM’s entire Coffee Lake industrial motherboard family including the BC370Q and BC246C (ATX), RX370Q (uATX), MX370QD and MX310HD (mini-ITX) are able to support both the 8th and 9th Gen Intel® Core™, Celeron, and Pentium processors ranging from 4 core to select 8 core processors. In addition to running both 8th and 9th Gen Intel® Core™ processors, this family of high-performance industrial motherboards also supports Intel® Optane™ and the latest DDR4-2666 memory delivering the capability needed to consolidate multiple workloads and accelerate the computing power to drive the ever expanding capability of your products.
BCM, an associate member of Intel® Internet of Things Solutions Alliances, introduces four new Q370 series embedded industrial motherboards based on the 8th generation Intel® processor platform, codenamed Coffee Lake. These products are available in ATX (BC370Q), Micro ATX (RX370Q), mini-ITX (MX370QD), and 3.5” SBC (ECM-CFS) form factors. These four motherboards are equipped with LGA 1151 CPU socket with Intel® Q370 express chipset supporting the 8th generation Intel® Core™ (2C/4C/6C), Celeron® and Pentium® processors...
Please Note - By downloading the files from BCM website, you agree to accept the terms and conditions.
Multi-product change notice (PCN) to replace the audio codec on a significant number of BCM motherboards due to an end of life notification from the audio codec manufacturer. This change will involve both a BOM change (adding the replacement audio codec to the bill of materials) as well as a BIOS update to support the new audio codec.
11/02/2020
PCN for BC370Q and BC246C ATX industrial motherboard to help with compatibility with a broader range of power supplies and their variances in voltage bring-up timings.
07/08/2019
Multi-product PCN for the following products adding support for select Intel Coffee Lake Refresh 8th Gen Core and 9th Gen Core refresh processors: BC246C, BC370Q, MX310HD, MX370QD, RX370Q
Model Name
Description
BC370Q
Intel Q370 ATX Motherboard supports 8th Gen Intel Coffee Lake Processors
Accessory Included
1 x I/O Shield
182000000044
2.00mm pitch 11.8” length Parallel cable w/ full height bracket.
30cm DB25 Male > 26pin 2mm pitch
182000000073
2.00mm pitch 19.7” (50cm) length Serial cable w/ full height bracket. 50cm, 10pin 2mm pitch, wafer> DB9 Molded Ribon Cable
183000000006
2.00mm pitch 12” length Serial cable
182437200040
2.54mm pitch 14” length Dual port USB cable w/ full height bracket.
40cm, 10pin Dual Row 2.54mm Pitch > Dual Molded USB
